How I Can Perform CCNA Labs In Self Study
1stly if you have an institute which can permit you for practice Labs only (in some $) or you have any relation with CEO/teacher of that institute and he will give you access for only few hours per week then try it first bcz it is very cheap/helpful for you. I also used this way.
2ndly use the dynamips router simulator. It will give you 100% results as real router give you.
Go in cisco share and search with the “dynamips” keyword. You will find everything which you want.Also you will lots of cisco IOS in there.
3rdly CCNA Video mentor will be very helpful for you in preparation of Labs.
Fourthly there are also some other router simulators like boson, routersim etc you can practise on them for switching but be sure that they dont give 100% results.
Fifthly the companion CDRooms with sybex and cisco press books are available in my collection give me someday to search and upload.
Sixthly You can practice with too many commands on already preconfigured labs by using CCNA Flash Cards(already shared in cisco share section)
Note:- CCNP,CCSP and even CCIE flash cards also has been released.
Author: faisal.saleem Infomation from: Sadikhov Forum
Robin Lee :: Jul.14.2008 :: Articles And Tutorials :: 3 Comments »
What is a minimum suggested setup for a CCNA lab?
I have manage to get my hands on 3x 2601 routers (incl. 2x ISDN WICs and 1x serial WIC) coupled with 2x 2950 switches, and a 3550 switch i think i have quite a good setup ?
Great!
You’ve got the best setup you need. With this setup, you can do almost any lab from CCNA to CCNP.